Gingoog Electric Trading (G.E.T.) ™

September 6, 2009

DANFOSS Softstarters

Filed under: GET MCD-100 series — Ralf @ 2:19 AM

Soft starts protect gear, goods, equipment and environment

 After the completion of the MCD-200 category some moments ago I would like to round up the Danfoss Softstarter stories now with the MCD-100 series, the smallest of all Danfoss Softstarter series which is perfect for all the simple applications using 25A and below.

Before going into more details let us recall again together what Softstarters are about. We spoke already about this product range in the GET Softstarters category but let us just quickly refresh our minds again:

An AC motor in general switched directly on to the mains power supply will ultimately struggle to reach its nominal speed as quick as possible.

This draws maximum current from the power supply and accelerates the application with its maximum torque and depending on the particular application, this can cause different problems.

Applications like pumps, conveyers, centrifuges and bandsaws must be started slowly to prevent mechanical shocks such as water hammer and strains on bands, couplings and shafts.

Principle of a Phase Angle Control:  

A Softstarter is an electronic device that regulates the voltage to the motor and this provides a smooth transition from standstill to full speed operation of the application.

DANFOSS VLT Softstarters all use the principle of phase angle control, a back to back coupled thyristors ramp up of the motor voltage.

In some DANFOSS VLT Softstarters, current transformers measure the actual motor current, providing feedback for starting current control but also for numerous motor and application protection functions.

DANFOSS VLT Softstarters cover a comprehensive range:

Soft starting and soft stopping (equally important) can be controlled in a number of ways depending on the application.

Some applications require non linear voltage ramp up and the voltage ramp is therefore related to the actual current drawn. Conversely, a bandsaw as another classic example requires a quick stop function provided by a DC brake.

Then again, a number of applications require a kick-start torque for an instantaneous period of time, followed by a soft ramp up acceleration.

DANFOSS VLT Softstarters do cover all of these applications and much more!

Find much more information in our MCD-100 folder

and visit also our complete GET Sky Drive Section

We certainly do hope that you enjoyed again the read and that you stay with us for more upcoming technical reading pleasure.

Retrieve our GET Contact Details  or send us your E-mail inquiry through the GET Contact Form.

Ralf Wabersich

Gingoog Electric Trading (G.E.T.)


Leave a Comment »

No comments yet.

RSS feed for comments on this post. TrackBack URI

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

Blog at

%d bloggers like this: